Caltech Micromachining Laboratory
IC-Integrated Flexible Shear-Stress Sensor Skin
Project Abstract
This paper reports the successful development of the first IC-integrated
flexible MEMS shear-stress sensor skin. The sensor skin is 1 cm wide, 2
cm long and 70 mm thick. It contains 16 shear-stress sensors, which are
arranged in a 1-D array, with on-skin sensor bias, signal-conditioning, and
multiplexing circuitry. We further demonstrated the application of the sensor
skin by packaging it on a semicylindrical aluminum block and testing it in a
subsonic wind tunnel. In our experiment, the sensor skin has successfully identified
both the leading-edge flow separation and stagnation points with the on-skin circuitry.
The integration of IC with MEMS sensor skin has significantly simplified
implementation procedures and improved system reliability.
Reference
Y. Xu, Y.C. Tai, A. Huang and C.H. Ho, “IC-integrated Flexible Shear-stress Sensor Skin,” Technical Digest,
Solid State Sensor and actuator Workshop (SSAW’02), Hilton Head Island, South Carolina, June 2002. pp. 247-250.
Involved Personnel
Yong Xu, Yu-Chong Tai, Adam Huang, and Chih-Ming Ho
Related Publications
F. Jiang, Y. Xu, T. Weng, Z. Han, Y.-C. Tai, A. Huang, C.-M. Ho, and S. Newbern, "Flexible shear stress sensor skin for aerodynamics
applications," presented at IEEE International Conference on Micro Electro Mechanical Systems (MEMS), Miyazaki, Japan, 2000.
C. Liu, Y. -C. Tai, J. B. Huang, and C. M. Ho, "Surface Micromachined Thermal Shear Stress Sensor," presented at ASME
International Mechanical Engineering Congress and Exposition, Chicago, IL, 1994.
X. Q. Wang, Z. Han, F. Jiang, T. Tsao, Q. Lin, Y. -C. Tai, and C. M. Ho, "A Fully Integrated Shear Stress Sensor,"
presented at International Conference on Solid-State Sensors and Actuators (Transducer), Sendai, Japan, 1999.
X. Q. Wang, X. Yang, K. Walsh, and Y.-C. Tai, "Gas-phase silicon etching with bromine trifluoride," presented
at International Conference on Solid-State Sensors and Actuators (Transducer), Chicago, IL, USA, 1997.
Y. Xu, C.-W. Chiu, F. Jiang, Q. Lin, and Y.-C. Tai, "Mass Flowmeter Using a Multi-Sensor Chip," presented at
IEEE International Conference on Micro Electro Mechanical Systems (MEMS), Miyazaki, Japan, 2000.